product presentation:
The submersible mixer is a new type and efficient submersible mixer device, which is mainly composed of submersible motor, impeller, guide cover, sealing mechanism, hand-operated winch mechanism and electrical control. Stirring impellers stir liquid to produce rotational jet, mixing by shear stress along the jet surface, so that friction between flow field and liquid outside flow field produces stirring effect, forming volume flow at the same time of extreme mixing, and obtaining controlled fluid transportation by applying large volume flow mode.
selection principle :
Submersible mixer selection is a more complex work, the correct selection scheme directly affects the normal use of the equipment, as the principle of submersible mixer selection is to let the mixer in the appropriate volume to play the mixing function, this standard is generally available flow rate to determine. According to the different process requirements of sewage treatment plants, the low flow rate of mixer selection should be guaranteed between 0.15-0.3m/s, if the flow rate is lower than 0.15m/s, the effect of push flow stirring cannot be achieved, and if the flow rate exceeds 0.3m/s, the process effect will be affected and waste will be caused. Therefore, before selecting the type, we must first determine what place the submersible mixer is used in, such as: sewage tank, sludge tank or biochemical tank; followed by the parameters of the medium, such as: suspended matter content, temperature, PH value, etc.; as well as the shape of the pool, water depth and even installation methods will have an impact on the selection, but also should consider energy-saving factors, because this will affect the user's future operating costs. Refer to the flow field diagram of submersible mixer below.
performance parameter:
Installation Instructions
1,In order to ensure the normal operation of the submersible mixer, please make correct selection of the operating environment and the operating modes.
2,The highest temperature of the media shall not exceed 40°C.
3,The scope of the PH value of the media:5-9.
4,The density of the media shall not exceed 1150kg/m3.
5,The depth of submersion shall not exceed 10m.
Production workshop diagram:
finished good drawing:
product presentation:
){kind=link}